Fix the gaps your existing plant already has.

Match your problem to the right intervention.

HIGH COD LOAD

OIL & GREASE CONTAMINATION

EXCESS SLUDGE PRODUCTION

COD Reduction Enhancement

Oil & Grease Control

Sludge Optimisation

Atomix MTA solution accelerates biological oxidation rates at your existing HRT. Measurable COD removal improvement without adding aeration capacity or extending retention time.

Targeted emulsion-breaking chemistry dosed at the pre-treatment stage. Separates bound fats and oils before they reach the biological zone, protecting downstream performance.

Reduces volatile solids generation at source. Direct output: lower sludge volume for dewatering, lower disposal frequency, lower total treatment cost per cubic metre.

Coagulation & Flocculation

Effluent Performance Boost

A combined dosing protocol that lifts overall effluent quality across multiple parameters simultaneously — applied when a plant is approaching a discharge limit without a clear single-cause failure.

Corrects charge imbalance and floc fragility under variable load conditions. Stable floc formation means lower coagulant dosing rates and more consistent settled water quality.

+ Lower Operational Expenditure

Works inside your process. No line stoppage required.

Atomix MTA can be designed to dosed into your existing flow at the pre-treatment stage and have a relatively small plant footprint. Your plant keeps running while performance improves.

Raw Effluent

Pre-Treatment

Atomix MTA Dosing

Reaction Enhancement

Cleaner Output

Additive injected at the pre-biological dosing point. Rate set to your plant's measured load — not a generic benchmark.

Biological activity and settling performance improve within your existing HRT. No additional tanks or contact time.

Screening and primary separation run as normal. No modifications to existing equipment or tankage.

High-load influent enters from your process — COD, oil, solids, heavy metals at actual plant concentrations.

Lower COD, reduced sludge, stable effluent quality — measured at your discharge point against your actual consent limits.

*Based on general Industrial Wastewater

Tell us your load conditions.
We'll show you the numbers.

Bring your discharge data and plant type or we can arrange a pick up of the sample.